Comprises of:
1 x 4" roof flat (cedar)
1 x Crown board
1 x Queen excluder - wired and framed
1.1 x National brood DN4 (self spacing Hoffman) pack of 10
1 x National brood wired foundation x10
2 x National shallow wired foundation x10
3 x Nails for hives
3 x Plastic runners (pair)
1 x National Dummy Board
1 x Floor quality mesh assembled (cedar) with entrance block
1 x National brood flat (cedar)
2 x National super flat (cedar)
2.4 x National super SN4 (self spacing Hoffman) pack of 10

Comprises of:
1 x 4" roof flat (cedar)
1 x Crown board
1 x Queen excluder - wired and framed
3 x Plastic runners (pair)
3 x Nails for hives
1.1 x 14x12 deep self spacing pack of 10
2.4 x National super SN4 (self spacing Hoffman) pack of 10
2 x National shallow wired foundation x10
1.1 x 14x12 wired foundation x10
1 x 14x12 dummy board
1 x Floor quality mesh assembled (cedar) with entrance block
1 x National 14" x 12" Brood Body
2 x National super flat (cedar)

Comprises of:
1 x WBC mesh floor with legs assembled (cedar)
1 x WBC porch
3 x WBC lift flat (cedar)
2 x WBC super flat (cedar)
1 x WBC brood flat (cedar)
1 x WBC narrow roof flat (cedar)
1 x WBC framed wire queen excluder
3 x WBC castellated spacers 10 slot (pair)
1 x WBC crown board
1 x National brood DN1 (straight) pack of 10
2 x National super SN1 (straight) pack of 10
1 x National brood wired foundation x10
2 x National shallow wired foundation x10
1 x WBC entrance slides
1 x National Dummy Board

Comprises of:
1 x 4" roof flat (cedar)
1 x Commercial brood flat (cedar)
1 x Crown board
1 x Queen excluder - wired and framed
3 x Plastic runners (pair)
3 x Nails for hives
1 x 4" roof flat (cedar)
1.1 x Commercial brood deep (self spacing Hoffman)
2.4 x Commercial shallow (self spacing Hoffman)
1.1 x Commercial wired foundation deep x10
2.4 x Commercial wired foundation shallow x10
1 x Commercial dummy board
2 x Commercial super flat (cedar)
1 x Floor quality mesh assembled (cedar) with entrance block

Comprises of:
1 x Commercial brood flat (cedar)
1 x Floor quality mesh assembled (cedar) with entrance block
1 x Queen excluder - wired and framed
1 x Crown board
1 x 4" roof flat (cedar)
1.1 x Commercial brood deep (self spacing Hoffman)
2.4 x National super SN4 (self spacing Hoffman) pack of 10
1.1 x Commercial wired foundation deep x10
2 x National shallow wired foundation x10
3 x Plastic runners (pair)
3 x Nails for hives
2 x National super flat (cedar)
1 x Commercial dummy board

Comprises of:
1 x National nuclus hive (cedar) flat

Comprises of:
1 x 6 frame National nuc hive (polystyrene)

Comprises of:
1 x 6 frame National 14x12 nuc hive (polystyrene)

Comprises of:
1 x 6 frame Commercial nuc hive (polystyrene)

Comprises of:
1 x Commercial nuc hive cedar

Comprises of:
1 x National Poly Hive with 2 Supers (Empty FLAT)

Comprises of:
1 x National Poly Hive with 2 Supers (Empty FLAT)
1.1 x National brood DN4 (self spacing Hoffman) pack of 10
2.4 x National super SN4 (self spacing Hoffman) pack of 10
1 x National brood wired foundation x10
2 x National shallow wired foundation x10
1 x National Dummy Board
1 x National Dummy Board

Comprises of:
1 x National Poly 14x12 Hive with 2 Supers (Empty FLAT)

Comprises of:
1 x Commercial Poly Hive with 2 National Supers (Empty FLAT)

2.48mm Aperture - 0.7mm Wire Diameter - Black Epoxy Coated Steel - Woven Wire Mesh

2.47mm Aperture - 0.71mm Wire Diameter - Galvanised Steel - Woven Wire Mesh

Use these in the autumn when mice or other rodents may be looking for a warm winter retreat. The damage caused by mice etc. can be substantial if left to their own devices. They will eat honey, pollen and even the bees, destroy comb and generally disturb the brood nest. Mouseguards can be removed in the spring. A simple galvanised metal strip measuring 470x38x0.5mm with two rows of 10mm holes, so will fit all hives apart from the WBC. Held in position across the entrance of a standard floor by drawing pins

Size (L x W x H): 60.00mm x 55.00mm x 200.00mm

WBC Lift is supplied flat for assembly

Porter bee excapes can be purchased to use as clearing board

The slotted steel type is made from 0.5mm galvanised steel

A snelgrove board can be used for many manipulations in bee keeping that require switching of bees between different parts of a bee hive.

An adjustable circular disc that can be used as an alternative to the traditional floor entrance. Often used in the USA as an upper entrance in a large hive. It has four settings, closed, completely open, and closed with ventilator or queen excluder segment that can be used as a swarm control measure. 190mm in diameter with 6mm fixing hole.

A great way to secure the hive into one component - especially useful for nucs. Comes with 2 x spring clips- screws are not included

SEASONAL VARROA TREATMENT VarroMed® is the first EU wide registered Bee Medicine approved by the European Commission. This product comes in a 555ml bottle featuring an integrated application-nozzle and a practical scale for easy dosing. VarroMed® is a ready-to-use product based only on naturally occurring substances with a combination of two active ingredients–Formic acid and Oxalic acid dihydrate. It has received a 0-days withdrawal period and it is suitable for organic beekeeping. VarroMed® is indicated for treatment of Varroosis in honey bee colonies during spring, late summer, autumn and winter with and without brood.

The European Varroa treatment of choice is now licensed for use in the UK and is exclusively available from ourselves. In packs of 10 strips. Each pack will treat five hives, each strip is 210x40mm wide and therefore fit neatly between the frames without having to be cut or bent as with Apitraz strips. The active ingredient is Amitraz which paralyzes the varroa mite causing it to fall off the bees. One single application has efficacy up to 99% and there are no temperature constraints as there are with MAQS and other products. It can be used at any time of year (supers must not be on the hives). The strips are left in for between 6 and 10 weeks depending on the size of the brood.

Apiguard is a sophisticated, patented slow release gel that ensures correct dosage of its active ingredient, thymol. Thymol is a naturally occurring substance derived from the plant thyme.

(Includes a measuring tool and 2 treatment caps) *Butane Gas Torches with 22mm nozzle required. A very portable, low cost devise which has been developed to be used with an approved Oxalic Acid product. Enables bee keepers with single or multiple hives to effectively treat against Varroa. Treatment takes less than 30 seconds per hive.

Propolis Tincture Warning: The Isopropanol and resulting tincture is highly flammable so take necessary precautions - The product is for external use only and is not to be ingested. It is useful to source an old working electric coffee grinder from a car boot sale/ charity shop Put your propolis chunks in a plastic bag in your freezer Take a few chunks of propolis from the freezer and grind them immediately to a powder. Place the powder in a zip lock freezer bag and return it to the freezer. Grind more if necessary. Mix 1 part propolis by weight to 9 parts IPA (Isopropanol 99% pure) in a disposable glass bottle with a lid, swirling as it is added, then cap. Place the capped bottle in the dark on top of hot water tank in airing cupboard or on boiler - shake daily for 4 weeks. Much of the propolis will dissolve but the beeswax, bee legs, and wood shavings, etc. will not. Place filter paper in funnel and pour the slurry of propolis and alcohol through the funnel/filter into a sealable bottle The resulting clear dark fluid will be an approximate 10% saturated propolis tincture solution

Bee Quick is a non toxic blend of natural oils and herb extracts for clearing supers

THYMOL CRYSTALS - 30g Anti-fungicide for syrup feeds. Dissolve 30g contents with 150ml of methylated or surgical spirit. Add 2 teaspoons to 4.55 lt (1 gal) of syrup and stir well. If solution is kept tightly sealed will last indefinitely.

The use of icing sugar is becoming more and more accepted worldwide. We are now therefore offering this 1kg capacity air bellow operated duster. Simply fill the chamber with dry icing sugar, insert tube into hive through the floor and pump vigorously. Moving the bellows quickly from left to right and front to back. Continue for approximately 20 seconds. A card or sticky floor insert is a good idea as the varroa drop can be immediate.

Beetle Blaster is a plastic trap inserted between frames in a hive to trap Small Hive Beetles (SHB) and thereby protect healthy honeybee colonies. It also acts as a very effective sentinel device. The trap, 23 cm long and 3.5 cm deep, is designed to fit neatly between outer frames in a hive. Each Beetle Blaster can contain about 25ml of vegetable oil which acts as the trapping fluid.The holes in the top of Beetle Blaster are big enough to allow SHBs to enter, but cannot be accessed by honeybees.

ApiShield is an integrated trap to safeguard honeybee colonies from predation by hornets, wasps, wax moth and robber bees. Manufactured in pine wood. The trap completely replaces the traditional solid hive floor. When first installed under a hive, the side entrances should be blocked for at least 3 days with the supplied bars. This teaches the colony’s bees to enter only through the hive entrance, which they can protect. After three days bees from the colony have learned that their entrance is at the front only. When the bars are removed, the bees will not use the side entrances but predators will enter through these unprotected openings, attracted by the natural scent and sound of the colony. No bait is required. Cone entrances prevent the invaders from leaving the trap and they will die from dehydration.

Formulated for the complete bee and honey production environments including poly hives. This concentrated cleaner sanitiser is a powerful tried and tested bactericidal, virucidal and fungicidal product. A brand new concept for beekeepers that will keep equipment, tools, hives and bee wear safe to use, hygienically clean and disease free. Safe to use on poly hives. Will not degrade, stain or damage any water washable surface. Only to be used for cleaning. Spore forming bacterium such as Nozema, Chalkbrood and American Foulbrood are all fungicidal diseases of honey bees. Streptococcus pluton is a bacterial infection that causes European Foulbrood in honey bees. When used at the correct concentration Hive wash is highly effective against moulds and yeasts. Typical pathogens such as E. Coli, Listeria, Campylobacter and Salmonella are eliminated when these concentrations are adhered to. Prevents cross contamination and the spread of disease. POWERFUL CLEANSER / SANITISER BACTERICIDAL- VIRUCIDAL – FUNGICIDAL FANTASTIC VALUE = 100 REFILLS OF TRIGGER SPRAY SPECIALLY DEVELOPED FOR BEEKEEPERS CLEANS POLY HIVES AND WOODEN HIVES WILL NOT DEGRADE POLY HIVES CAN BE USED IN PRESSURE WASHERS SUITABLE FOR WHOLE HONEY PRODUCTION AREA CLEANS TOOLS AND EQUIPMENT UNIQUE PRODUCT FOR BEEKEEPERS STOPS CROSS CONTAMINATION POWERFUL LOW FOAM SANITISER KILLS GERMS! NO RESIDUE, PLEASANT SMELL

Varroa EasyCheck is an labour-saving tool for beekeepers who want to monitor Varroa mite infestations in honey bee colonies. Transparent bowl allows easy counting of mites directly in the device Beekeepers simply collect 200 or 300 bees and shake them for 60 seconds in the EasyCheck shaker with a solution of alcohol or winter windshield washer fluid. Mites separate from the bees and fall to the bottom of the transparent bowl where they can be easily counted. The liquid may be reused.

The Bee Gym was developed on the principal that with just a little help, bees could be taught how to more effectively groom off the varroa mite. With its unique combination of specifically designed grooming aids, the Bee Gym encourages and enhances the natural behaviour of honeybees, assisting in the removal of varroa mites from the colony. The Bee Gym should be used as part of an Integrated Pest Management approach to varroa control.

This clever and very successful system encompasses every aspect of the process, achieving the benefits of grafting without the difficulties One hundred brown cell cups are placed in the back of the comb box which has previously been fixed in a brood comb, and the queen is put in the front of the cage under a queen excluder. As she is in full lay, she continues to lay eggs in the artificial cups. She can be released manually the next day. On the 4th days, very small, newly hatched larvae can be seen through the transparent back and cups, each in a pin-prick of royal jelly. Very easily, each cell cup is lifted off with a cell cup cap which passes onto a cell bar fitted with cell bar blocks. When the queen cells are sealed, hair roller cages can be slipped over, so that emerging virgins are contained. These cages can then be used for travelling and introduction. Each kit contains: 1 plastic comb box, 10 hair roller cages, 100 brown cell cups, 10 cell bar blocks, 10 cell cup caps and full instructions.

This makes catching queens on the comb easy. The spring action closes the cage shut around the queen and the worker bees exit through the slots

This Marking Cage is a gentle way of holding queens for marking and examination. It consists of a plastic tube with mesh at one end and a soft, foam-padded plunger at the other. This allows the queen to be pushed gently up the tube on the foam until the thorax rests against the plastic mesh. In this way queens can be held safely without any damage..

This is a yellow plastic cage for carrying and introducing your queen to your colony.

Assemble the mini-nuc with a strip of foundation in each frame. Fill the feeder compartment with fondant or wetted sugar. Shake 2 cup full of young bees from super into the mini-nuc, and close-up, making sure that ventilation is clear. Leave for about an hour, until the bees roar in panic, then run a virgin queen in or place queen cell. Leave in a cool dark place for two or three days. Release the bees at the chosen site. Check in two weeks for signs of laying.

Mating Hive for Queen rearing - This is a complete mini hive with plastic frames, queen excluder and plastic crown board. Place 2 cups of bees from a super into the hive with fondant or wetted sugur and leave in dark place for 2 days. Open and allow to fly and bees will draw out comb. Add queen cell or virgin queen to colony and within 2 weeks queen should be laying. Transfer mated queen to final colony and the nuc can then be used for another cycle of queen hatching/mating

Ingenious device. Place open end of chamber over queen and close flexible shutter. Use forefinger of same hand to depress plunger pushing the queen up to the marking mesh. The plunger may be a little stiff at first but soon loosens to enable easy marking of your queen.

Pure raw beeswax block

Our Propolis is specially harvested and extracted to capture the full spectrum of essential tree resins (all the possible varieties, different locations and seasons). Propolis is a major source of bioflavonoids, antioxidants, and deep defense works.

stainless steel diameter:40cm deep:40cm net weight: 9.5kg capacity:about 50kgs honey with two bucket handles and honey gate

Stainless steel tap to fit 44mm hole

Refractometer to measure water content of honey Tri-scale measurement (water, baume & brix) - Measuring Range: 58-90%Brix, 38-43 Be (Baume), 12-27% Water - Division: 0.5% Brix, 0.5Be (Baume), 1% Water

approximately 24 cm stainless steel round double filter with pullout coarse filter

An effective and inexpensive version of the stainless steel strainer. Ideal for 30lb. buckets. Food grade plastic and nylon mesh

Traditional finely woven 100% cotton muslin - Machine washable - Size: 90cm square

Stainless steel with left-side serrated edge, right side ground smooth wooden handle 27 cm

A manual 2 frame plastic tangential extractor with fitted valve, The extractor will fit two BS or Smith shallow frames, two BS Manley frames, two BS or Smith deep frames, two commercial shallow frames or two commercial manley shallow frames.

4 Frame extractor with legs that can be bolted to the floor or to a pallet to stop the annoying wobble when extracting. Takes 4 shallow or 2 deep, all frames tangential.

Heavy guage stainless steel. Honed cutting edge ensures a clean cut every time. Spring assisted plunger action aids comb release. Cuts comb 85 x 65mm, approx 8oz

A strong mesh bag with hooks to attach to extractor

This large uncapping tray has sturdy supports to hold the frame during uncapping and a straining base to the top tray to catch cappings and allow the honey to drain into the tank below. The integral high capacity honey tank will easily hold the cappings honey from a very large number of supers. When full the honey sump can drained via a standard honey gate valve through a sieve directly into your honey buckets without the need for any additional processing. The frame rack will enable you to empty the frames out of your supers before uncapping, allowing you to uncap and extract in one operation, speeding up the whole process of extraction. Uncapping tray composed by a food-grade plastic basin with stainless steel cover

Very long stainless steel tool. 40mm chisel and scraper. 40mm lever hook.

Tempered stainless steel construction made in the USA. Makes frame removal smooth, quick and easy. Integrated top bar scraper and nail puller

Traditional hive tool with comfortable, triple riveted wooden handle

The conventional chisel part of the tool can be used to release frames from the runners and once free the grip is applied to pull the frame from the box.

galvanized, for extraction of frames, two side-mounted return springs bring the clamp apart

Steel tool for cleaning frame grooves and wedges

Long wooden handled soft brush with a twin row of natural fibres. Use for removing bees from a comb.

Add approx 10% of volume to your mix to make a quality hardened polish

Handy sized pincers with accurately shaped and cut jaws for removing frame nails. Spring operated handles with rubber grips.

Embedder with 100mm shaped wooden handle and 50mm diameter spur wheel.

A stainless steel tool with central, wooden grip, that has a variety of features. Toothed frame lever, flat scraper, angled scraper, hammer (head part can be removed), frame cleaner and excluder cleaner. 270x90mm at its widest point.

For those out of reach swarms. Made from strong canvas and steel. Place the bag underneath the swarm and gently ease the bag upward to enclose as much of the swarm as possible. Push up and the swarm drops into the bag and then rotate 90 degrees to hold the bees in the bag. Lower to your collecting box or poly nuc then either release the cord tie or invert into the box/hive and shake gently. (Mounting pole not included)

Specifications: Material: Cotton Color: white Length: approx. 61m Width: approx. 2.5mm